FR 
ES 
IT 
PL 
SK 
CS 
EN 
A complementary PowerPad for the RoBoPads and BrnoPads.
About PataPads
An add-on to the RoBoPads and BrnoPads.
PataPads are intended:
- for truly extreme acceleration (you need one of the most powerful unicycles on the market so it doesn't cut out under you when it can't deliver enough power for that kind of acceleration), where you have your acceleration PowerPads extremely far forward and low, or you accelerate using the JumpPads alone. During this extreme acceleration you literally lie back into an absurd angle — you try to get mainly your bottom as far forward as possible (it's not just about leaning the upper body forward, which doesn't create as much leverage and goes against the body's natural movement — you'll probably feel lower-back pain over time). During this truly extreme lean the PataPad holds your heel, gives you more confidence and of course significantly helps with acceleration.
- for riders who fly through the air, to give them more confidence.
- for riders who ride seated, to help them accelerate with the heel.
- for riders who ride difficult terrain (forest trails etc.), to give them more confidence.
- for normal riding I think PataPads are unnecessary, but if you don't know what to do with your money ...
- mainly for very advanced riders who will make use of them especially in more extreme riding.
Warning: If you set the PataPad really tight — so tight that you can barely get your shoe onto the pedal when setting off — you risk your foot getting trapped in the unicycle in case of a fall = a high risk of more serious injuries such as a sprained or broken ankle, knee ligament injuries and other harm.
- PataPads protect your wheel in case of a fall or crash.
- PataPads should work on any sufficiently large electric unicycle.
- PataPads have a different hardness and flexibility in every spot for maximum function and comfort for your legs.
- I make PataPads using advanced 3D-printing technology.
- I make PataPads from RoBoFlex — a high-quality, flexible and durable thermoplastic rubber.
PataPads
Price: 900 CZK / pair
ORDER
Please contact me via WhatsApp (preferred — phone is Czech only).
Write your order: „I want to order: – items, colors“
I need: full name, address, e-mail, phone.
Shipping to EU: approx. 5–10 EUR.
Personal pickup in Brno, CZ possible.
Material and colours of PataPads
Base flexible material of PataPads:
Material and colors - RoBoFlex
Material and colors - RoBoFlex
- I have 17 colors of RoBoFlex material in stock for you.
- RoBoFlex = a high-quality flexible, durable thermoplastic rubber.
- For some products, a Flex with a different hardness and slightly different properties can also be used.
- A set of PowerPads, bumpers and other accessories can also combine several colors.
Color chart 17
What's in the box of PataPads:
- 2x PataPad (right + left)
Self-adhesive hook-and-loop tape for the electric unicycle
Price: 100 CZK / 10 cm x 1 m
- The self-adhesive hook-and-loop (Velcro) for the unicycle is only one side of the Velcro: the loops, a strap 10 cm wide.
- How much Velcro you need for your unicycle:
- Self-adhesive Velcro for a regular unicycle (Lynx, Patton, S22, etc.): needs about 3 meters.
- Self-adhesive Velcro for a large unicycle (V13, etc.): needs about 4 meters.
- Self-adhesive Velcro for the V11: bottom 25 cm (glue from the bottom edge), top: 34 cm glued from the middle, then trim.
- Self-adhesive Velcro for the V11Y: bottom 29 cm (glue from the bottom edge), top: 34 cm glued from the middle, then trim.
- Your PowerPads come with Velcro (hooks) already attached as a gift.
- If you need Velcro (hooks) or a different strap width, please contact me.
ORDER
Please contact me via WhatsApp (preferred — phone is Czech only).
Write your order: „I want to order: – items, colors“
I need: full name, address, e-mail, phone.
Shipping to EU: approx. 5–10 EUR.
Personal pickup in Brno, CZ possible.
See the accessories in person – Brno, Prague, EUC races
You can see, touch and try RoBoKoLo accessories in person.
At my place in Brno, Czech Republic (EU), at partner services in Prague and Nový Hrozenkov – and at xErace races.
Brno – RoBoKoLo
Visiting Brno? Let's meet in person – I'll gladly show you all the accessories I keep in stock or use myself.
You can try some of them right away.
You'll meet the designer and maker in person.
daily 11:00–21:00 · CZ/EN
Prague – EUC Service Alex
Alex keeps plenty of my products in stock – view them and buy on the spot.
He provides professional installation and advice.
By prior arrangement, I can send your order directly to his shop.
Of course, you can also order directly from Alex.
Nový Hrozenkov – InMotionFun
Petr Maňák's EUC service in the east of the Czech Republic.
He occasionally has my products in stock and, like Alex, provides professional installation and advice.
By prior arrangement, I can send your order directly to him.
xErace races
RoBoKoLo is a partner of the xErace races.
There's a chance you'll meet me there or see my products in action.
Race winners automatically get a discount from me 😉
About RoBoKoLo
RoBoKoLo is one person: Yufi – designer and maker of accessories for electric unicycles.
Everything is made in Brno, Czech Republic (EU): in my head, by my own hands, from idea to print on my own 3D printing farm.
Custom accessories for your EUC
I design, test and 3D print accessories for electric unicycles – PowerPads, bumpers, seats, pedal pads, extra lights and much more.
Whatever your EUC needs, I've got it covered.
The range grows with you
A lot of accessories exist simply because customers asked for them.
Can't find what you're looking for?
Write to me – I might already be making it, or it could exist thanks to you.
Just ask, and it becomes the next product.
I'll print your models too
Have your own model?
I'll gladly print it in RoBoQuality – a part for your unicycle or something completely different.
You supply the file, I take care of top-quality printing.
Always happy to make it perfect
Most of my accessories are already the best thing my customers can put on their EUC.
But if something isn't quite right for you?
Tell me what and why. I'm a designer with my own prototyping capability 😉
I'll fine-tune it for you.
Fair, honest craftsman's prices
You pay real value, not a brand-name markup.
The price mainly depends on the material and weight – custom changes affect it.
You'll find most prices already listed on the site.
Missing a price? Just ask and I'll confirm it.
Discounts for the community
Friends, riders from EUC meetups and the community – just ask about a discount.
And finally:
Thank you to everyone who doesn't ask for a discount, or even supports me financially or otherwise.
I really appreciate it. 🧡
– Yufi.Zongler.CZ, designer and maker at RoBoKoLo
PataPads gallery: